Galaxy Bearing Co.

M263310 TAPER BEARING M263310 TAPER BEARING
High-Quality Material: Our 23310 spherical roller bearing is made from high-grade GCR15 steel, ensuring exceptional durability and performance in demanding applications.

M268749DW / M268710 / M268710D Tapered Roller Bearings
M268749DW
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.

M268749/M268710 Timken
Category
Tapered Roller Bearing Single Row
Weight and Dimensions
Inner (d) Inch
16.375
Outer (D) Inch
23.25
Width (B) Inch
4.5
Weight (kg)
97.92
Product Properties
Precision
Standard Precision
The M268749/M268710 Timken is a single-row tapered roller bearing. This bearing type gets its name from the tapered rollers between the inner and outer rings. The raceways are conical. This design allows these versatile bearings to accommodate combined loads. They support high radial and axial loads (in one direction). The greater the contact angle, the greater the axial load capacity

M268749DW/M268710 Timken
Category
Tapered Roller Double Row
Weight and Dimensions
Inner (d) MM
415,93
Outer (D) MM
590,55
Width (B) MM
209,55
Inner (d) Inch
16.375
Outer (D) Inch
23.25
Width (B) Inch
8.25
Weight (kg)
184
Product Properties
Tapered Roller Pair Internal Play
No Internal Play Specified

561117 Timken Imperial Taper Roller Bearing
Imperial taper roller bearings comprise of two seperable components. The cone consists of the inner ring and roller cage assembly. The cup (or outer ring) has a tapered raceway which locates the cone. The taper design offers good combined radial and axial loads. These bearings are supplied as cup and cone set (inner and outer)

The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the outside diameter of the rollers.

This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.

LL481448/LL481411 is a single-row radial taper roller bearing.
The dimensions of the LL481448/LL481411 bearing are:
Bore (d): 26.5 in (673.1 mm)
Cup outer diameter (D): 31.25 in (793.75 mm)
Cone width (B): 2.4375 in (61.913 mm)
Cup width (C): 1.9375 in (49.213 mm)
Bearing width (T): 2.625 in (66.675 mm

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

Our tapered roller bearings stand up to extreme situations, including high-corrosive, high-temperature or low-lubricationCustom tapered roller bearings 32312/50 d（mm）：50. D（mm）：130. B（mm）：46 Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low